Mitsubishi Electric AG-150A Instruction Book page 29

3-7-1 Setting the Weekly Schedule
Click the menu item [Schedule Settings] and click [Weekly 1], [Weekly 2], [Weekly 3], [Weekly 4] or [Weekly 5]
in the sub menu to display the each Weekly Schedule setting screen. To set a weekly schedule, you first must
select what will be the target of this schedule and then set the schedule details from Sunday right through to
Saturday.
Note: If the [Annual schedule/Weekly schedule] license has not been registered, only the settings for Weekly schedule 1 can be
set.
Note: When the contents of an operation are executed as part of a schedule these contents will continue to be in effect until they
are changed by a schedule or browser etc. Therefore, if you are setting a schedule that is only for a particular day, be sure
to set your schedule in a way that will not impact on the next day's operation.
For example, if you wish to prohibit operations being performed from the remote controller after 17:00, set a Prohibit
operation for 17:00 and set an Enable operation for 23:59.
Note: Settings for the groups whose schedules have been Not Available from the control screen are settable, but their weekly
schedules will not be executed.
Note: In the system with TG-2000A of version 6.36 or earlier, only [Weekly Schedule 1] and [Weekly Schedule 2] can be used.
Seasonal settings
Set the starting and ending
dates for each season.
Setting Range
Select the range that
scheduling will be set for.
Block Name
Select the block to be set.
Group Name
Select the group to be set.
Group Number
Select the group to be set.
Copy (Group) / Paste
Click to copy or paste a
schedule between groups.
Expansion Controller system
selection buttons
Click to select the system to be set.
Undo button
Click to undo the changed.
3-7-1-1 Setting the Weekly Schedule for air conditioner and various groups
Text below explains how to set the weekly schedule for the group of air conditioners, Ventilators (LOSSNAY),
Air-To-Water (PWFY) units, and general equipment.
(1)Select the target for the schedule being set
(1-1)Select a particular group
If you wish to set a schedule for a particular group, select [Group] from
the Setting Range box.
29
Select a day of the week
Select which day to set the
schedule for.
Copy (Day of the week) /
Paste
Click to copy or paste a
schedule between each day of
the week.
Contents of Schedule
Operations set for the schedule
are displayed here.
Edit button
Click to set a schedule
operation.
Delete button
Click to delete a schedule
operation.
Save Settings button
Click to save the contents of the
schedule setting. The schedule
settings will not be saved
unless this button is pressed.