Mitsubishi Electric AG-150A Instruction Book page 13

Item
When floor layout setting is performed on AG-150A (not applicable to GB-50ADA-A and GB-
50ADA-J), preset floors are selectable besides [Overview] . When a floor is selected, a window
that shows group icons will be displayed on the floor layout.
Floor selection
The operation condition is indicated by the icon that is displayed. When you point to a group
icon with the mouse cursor, the group name is displayed. To switch to the operation screen,
click on the icon. The icons used to indicate the operation condition are shown below.
(1) Air conditioner group operation condition
Group icon
Note: Floor layout can be set only on the liquid crystal display on this unit. Refer to the AG-
150A Instruction Book for the floor layout setting or to see how to read layouts. If floor
layout is changed on this unit, restart the browser. New layout will be displayed after
restarting.
Note: On high resolution display, the whole floor can be displayed by increasing the browser
display size.
Note: After clicking a group icon, the operation area will be displayed at the left top of the
layout display screen. Scroll up to the left top of the screen for the operation of air
conditioning unit or general equipment.
ON OFF
Interlocked Interlocked
LOSSNAY ON LOSSNAY OFF
Energy saving
Setback ON
Note: Other than 4-aiflow icons, 2-airflow or ceiling-suspended icons are also available. Select
the icon type on Initial Setting Web.
Note: Whether to display the filter sign can be set on Initial Setting Web.
Note: The energy saving icon is displayed while the energy-saving control is performed in a
group of indoor units and in the outdoor unit belonged to that group.
Note: If a given LOSSNAY unit is interlocked with multiple indoor unit groups, the LOSSNAY unit
may be in operation even when the display shows that the unit is stopped.
Note: When setting LOSSNAY interlock with Mr. Slim units (M-series units, P-series units), the
air conditioning and interlocked LOSSNAY icon will display ON even when the interlocked
LOSSNAY is operating by itself. (This will occur when used with the following M-NET
adapter:PAC-SF48/50/60/70/80/81MA-E)
Note: When connecting multiple AG-150A controllers by connecting an Expansion Controller to
the system, "Schedule set," "Schedule Not Available," "Energy saving," and "Setback ON"
will be displayed only on the AG-150A controller that is executing these functions.
Note: The room temperature icon can be displayed only in the floor layout screen. (It cannot be
displayed in the all group list screen.) Dispay/Non-display of the room temperature can be
selected on the initial setting browser.
Description
Font color change
Changes the font color of group
name to either black or white.
Floor layout display area
Click to display floor layout.
Error
Schedule set
Unknown (during
initial startup)
13
Filter sign
Schedule
Not Available
The room
temperature