Checking The Send Mail Log - Mitsubishi Electric AG-150A Instruction Book

3-11 Checking the Send Mail Log

Click the menu item [Maintenance] to display the log of mail sent when an error occurred and after error
recovery. In order for a mail to be sent when an error occurs, the date related to sending the mail must be to
set using Initial Setting Web.
Clear log
Click to clear the send mail
log.
Update to most recent
condition
Click to update the screen so
that the most recent condition
is shown.
Send date/time
The date and time when the
mail was sent is displayed
here.
Item
Update to most recent
condition
Clear log
Send date/time
Error source address
Error code
Error status
Send mail status
Click [Update] to ensure the displayed items reflect the most recent condition.
When [Auto] is selected, information is updated automatically every minute to reflect the
latest information.
Click [Clear Log] to clear the send mail log.
The date and time of when the error occurred is displayed.
The unit address of where the error occurred is displayed.
Note: When an error occurs on the general equipment that is connected via PLC, PLC
number for General Equipment (row number 1 to 20 that PLC error mail setting is
made on initial setting Web) and General Equipment number (up to 32 pieces of
general equipment that are controlled by PLC for general equipment) will be
displayed. (Example: PLC1-32)
Note: When an error occurs on the general equipment that is connected via DIDO
controller, M-NET address of the DIDO controller will be displayed. (Which means
an error occurs on one of the general equipment that is connected to the DIDO
controller)
Note: If PAC-YG50ECA Expansion Controllers are connected, Expansion Controller
systems (1-3) and M-NET addresses (000-250) will appear (e.g., 1-053).
The error code of the error is displayed.
This indicates whether mail was sent when error occurred or after error recovery.
This indicates whether the mail was successfully sent by displaying [OK] or [NG].
Description
45
Error source address
The unit address of where
the error occurred is
displayed here.
Error code
The error code is
displayed here.
Send mail status
This indicates whether the
mail was successfully sent
by displaying [OK] or [NG].
Error status
This indicates whether
mail was sent when error
[Occurred] or after error
[recovery].