Mitsubishi Electric AG-150A Instruction Book page 31

(1-3)Select all groups
When you want to set a schedule that will apply to all groups, select
[All Group] in the Setting Range box.
When air conditioner groups, ventilator (LOSSNAY) groups, Air To
Water (PWFY) groups, and general equipment groups exist together
in the system, a new screen will appear to select the group. Click one
of the [All Air-conditioners], [All LOSSNAY], [All Air To Water], or
[Other Equipment] and the screen to set the batch operation will
appear.
If the system has only air conditioner groups or only LOSSNAY
groups or only Air To Water (PWFY) groups or only general
equipment groups, this selection screen will not appear.
Next a screen to select the schedule setup method will appear. Select
either [New settings] or [Based on the following group settings]. If you
plan to add to an existing setting, and then choose to base it on an
existing setting and select the name of the group you want to base the
setting on and click the [OK] button.
If you chose to make a new setting, the Contents of Schedule box will
appear completely blank. If you chose to base your setting on an
existing group, the contents of the schedule set for that group will
appear in the Contents of Schedule box.
(2)Set the starting and ending dates for each schedule type.
Click the [Edit] button on the right top corner of the Seasonal setting
window, and set the starting and ending dates for Weekly schedule 1 ,
2, 3, 4 and 5.
Note: When the season setting is set to "Not Available" on the Basic
System screen, [Edit] button will not be displayed.
Note: If the [Annual schedule/Weekly schedule] license has not been registered, the same schedule is followed
throughout the year, and the starting or ending dates cannot be set.
Note: These dates are common to all groups.
Note: If the periods for Weekly schedule 1, 2, 3, 4 and 5 overlap, the higher priority schedule will be executed in the
order of Weekly schedule 1, Weekly schedule 2, Weekly schedule 3, Weekly schedule 4 and Weekly
schedule 5.
(3)Select the day of the week
Click the day of the week listed in the Contents of Weekly Schedule
box you want to set the schedule for. You can select from Sunday
through to Saturday.
31
Check the checkbox to
enable the weekly
schedule.