Mitsubishi Electric AG-150A Instruction Book page 40

3-7-3-2 Modifying Today's Schedule for HWHP (CAHV) group
If a HWHP (CAHV) group has been registered, the [Air Conditioners] and [HWHP] buttons will appear as
shown in the figure below. Click [HWHP] to access the window for setting the today's schedule for HWHP
(CAHV) units. Click [Air Conditioners] to access the window for setting the today's schedule for air conditioning
unit, ventilator (LOSSNAY), Air To Water (PWFY) unit, and general equipment groups.
(1)Select the target for the schedule being set
Follow the procedure outlined for the weekly schedule (see 3-7-1-2) to select the range and object of the
schedule setting.
(2)Set the contents of the schedule setting
When one of the [Edit] buttons in the Contents of Schedule box is
clicked, a screen to set a schedule operation will appear. Use this
screen to set when to run an operation and set the type of schedule
operation (ON/OFF, operation mode, temperature setting, prohibit
remote controller operation) and then press the [OK] button.
It is possible to schedule operation by specifying the settings for
selected items (e.g., operation mode only or preset temperature only).
(3)Copy a schedule to another group
Follow the same procedures as outlined in section 3-7-3-1(3).
(4)Save the contents of schedule
Follow the same procedures as outlined in section 3-7-3-1(4).
40
[Air Conditioners] and
[HWHP] buttons