Component Identification; 10Gbe Pass-Thru Module Front Panel - HP 10GbE Pass-Thru Module User Manual

Component identification

10GbE Pass-Thru Module front panel

CAUTION:
resets.
Item Description
1 UID LED
•
Blue light on—The pass-thru module is activated.
•
Blue light off—The pass-thru module is deactivated.
2 Health LED
•
Off—The pass-thru module is powered off.
•
Green—The pass-thru module is powered up, and all ports
match.
•
Amber—An issue exists, such as a port mismatch. For more
information, see the HP BladeSystem Enclosure Setup and
Installation Guide.
3 Ethernet port
•
Green—Link is 10G.
•
Flashing green—10G link activity is detected.
•
Amber—Link is 1G.
•
Flashing amber—1G link activity is detected.
•
Flashing alternately green and amber—A link mismatch
condition exists. For more information, see the HP BladeSystem
Enclosure Setup and Installation Guide.
If you press the Reset button while the Health LED is green, the pass-thru module
Get other manuals https://www.bkmanuals.com
Component identification 7