FUNCTION SETTING
3) Press the FAN button so that the "Function number" display flashes. Then, press either the
SET TEMP.
button or the SET TEMP.
4) Press the FAN button so that the "Setting number" display flashes. Then, press either the
SET TEMP.
button or the SET TEMP.
5) Pressing the START/STOP button, confirm the setting.
(The data will be transferred to the indoor unit.)
●
When the data was not set up on the indoor
unit (-- is displayed.)
●
Set up the data again according to the
procedure in step 3), 4) above.
FUNCTION DETAILS
Refer to 5-6. FUNCTION DETAILS
button to set up the function number.
Function number
button to set up the setting number.
Setting number
Ex.) Function number : 30, Setting number : 01
GOOD
NOT GOOD
When the data was normally set up on the indoor
unit.
- (06 - 66) -
6. SYSTEM DESIGN