Indoor Unit (Setting By Simple Remote Controller) - Fujitsu AOU48RLXFZ Design & Technical Manual

5-5.

INDOOR UNIT (setting by simple remote controller)

This procedure changes to the function settings used to control the indoor unit according to
●
the installation conditions. Incorrect settings can cause the indoor unit malfunction.
After the power is turned on, perform the "FUNCTION SETTING" according to the
●
installation conditions using the remote controller.
The settings may be selected between the following two: Function Number or Setting
●
Number.
Settings will not be changed if invalid numbers or setting numbers are selected.
●
PREPARATION
(1) Turn on the power to the Branch box.
● By turning on the power indoor units, so make sure the piping air-tight test and vacuuming have been conducted
before turning on the power.
● Also check again to make sure no wiring mistakes were made before turning on the power.
Breaker ON
Branch box
- (06 - 64) -
Indoor
units
6. SYSTEM DESIGN