Rear Mount Vfd Driver Installation (Optional) - Advantech EP-55XX-AR10 User Manual

Rear Mount VFD Driver Installation (optional)

The EP-55XX rear mount VFD port is a USB interface. The rear mount VFD uses a Serial interface, so in
order to enable it you must install the included USB-to-Serial interface driver.
1. First, plug in the VFD Module.
2. Enter the USB To COM Driver folder and then run utility program
PL2303_Prolific_driverInstaller_v130.
3. Click Next on the Welcome screen. 4. Wait as the driver is installed.
5. Click Finish.
61