CIGWELD WELDSKILL 200HF Operating Manual page 4

200HF
OPERATING MANUAL
Read and understand this entire Manual and your employer's safety practices before installing,
operating, or servicing the equipment.
While the information contained in this Manual represents the Manufacturer's best judgement,
the Manufacturer assumes no liability for its use.
CIGWELD WeldSkill 200HF Welding Inverter
Instruction Manual Number 0-5406 for:
Part Number W1008200
Published by:
CIGWELD Pty Ltd
CIGWELD An ESAB Brand
71 Gower Street,
Preston, Victoria, Australia, 3072
Tel: +61 3 9474 7400
www.cigweld.com.au
Copyright 2015
CIGWELD Pty Ltd
All rights reserved.
Reproduction of this work, in whole or in part, without written permission of the
publisher is prohibited.
The publisher does not assume and hereby disclaims any liability to any party for any
loss or damage caused by any error or omission in this Manual, whether such error
results from negligence, accident, or any other cause.
For Printing Material Specification refer to document 47x1915.
Publication Date:
Record the following information for Warranty purposes:
Where Purchased:
Purchase Date:
Equipment Serial #:
!
WARNINGS
Fax: +61 3 9474 7391
October, 2015
____________________________________
____________________________________
____________________________________
i