Wired Timer Remote Operation - Chauvet Hurricane Haze 2D User Manual

Wired Timer
Remote
Operation
The wired timer controller allows you to automatically trigger fog output by setting interval and duration
times. LED indicator lights display the machine and controller's current state. Rotary knobs set interval
and duration times, while manual and continuous buttons allow overriding control.
1. Plug in the fog machine to power and turn the power switch to the product on.
2. Plug in the timer controller to the Manual Controller socket on the back of the fog machine.
3. Press the <TIMER ON/OFF> latching button on the timer controller. The Timer LED Indicator
above the button will light up. The <TIMER ON/OFF> latching button will remain on until it is
pressed again.
4. Set the INTERVAL, DURATION, and OUTPUT adjustment knobs to the desired positions.
·
INTERVAL knob sets the amount of time in between bursts of fog
·
DURATION knob sets the length of time that the fog machine will run during the burst
·
OUTPUT knob adjusts the fog output
5. Press the <CONTINUOUS> latching button and the fog machine outputs fog until the button is
pressed again. The Manual/Power LED Indicator above the button will light up during
continuous operation.
Note: The duration of continuous fog output is based on the capability of the fog
machine.
6. Press the <MANUAL> button to momentarily output fog. The fog machine will output fog for
as long as you hold down the button. During manual operation the Manual Momentary LED
Indicator above the button will light up.
Note: The duration of manual fog output is based on the capability of the fog machine.
Interval
Adjustment
Timer LED
Indicator
Manual/Power
LED
Timer On/Off
Latching Button
Page 10 of 16
Important: Using the Control Board, set the Fan and Haze output to 0. You can then
connect and operate the included wired remote with the Hurricane™ Haze 2D.
OUTPUT
Hurricane™ Haze 2D User Manual Rev. 10
Duration
Adjustment
Output
Adjustment
Manual
Momentary
LED
Manual Control
Momentary Button
Continuous
Latching Button