Low Power Delay With Shutter Closed; Reset Lamp Timer; Lamp Power; Maintenance Timer - Chauvet INTIMIDATOR HYBRID 140SR User Manual
Hide thumbs
Also See for INTIMIDATOR HYBRID 140SR:
- Quick reference manual (76 pages) ,
- Quick reference manual (68 pages)
Table of Contents
Advertisement
O
PERATION
Low Power Delay with Shutter Closed
To set the amount of time after leaving the shutter closed before the Intimidator Hybrid 140SR lamp enters
low power mode, follow the instructions below:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Lamp Setting.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select Low Power Delay.
7.
Press <ENTER>.
8.
Use <UP> or <DOWN> to increase or decrease the delay time, from 000–255 (0 seconds to 255
seconds).
9.
Press <ENTER>.
Reset Lamp Timer
To reset the record of how much time the Intimidator Hybrid 140SR lamp has spent powered on, do the
following:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Lamp Setting.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select Reset Lamp Timer.
7.
Press <ENTER>.
8.
Use <UP> or <DOWN> to select NO or YES.
9.
Press <ENTER>.
Lamp Power
The Intimidator Hybrid 140SR can operate with either a 132 W Osram HRI lamp, or a 140 W Osram HRI
lamp.
To set the Intimidator Hybrid 140SR in the correct mode for the installed lamp, follow the instructions
below:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Lamp Setting.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select Lamp Power.
7.
Press <ENTER>.
8.
Use <UP> or <DOWN> to select 132 or 140.
9.
Press <ENTER>.
Maintenance Timer
Maintenance Timer Interval
To define the length of the maintenance cycle on the Intimidator Hybrid 140SR, do the following:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Special Set.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select Interval.
7.
Press <ENTER>.
8.
Use <UP> or <DOWN> to increase or decrease the time, from 10–250 (10 hours to 250 hours).
9.
Press <ENTER>.
Intimidator Hybrid 140SR User Manual Rev. 2
Page 20 of 29
Hide quick links:
Advertisement
Table of Contents
