Fan Mode; Display Backlight; Screen Reverse; Dimmer Curve - Chauvet ROGUE R1X WASH User Manual

Operation

Fan Mode

To set the fan speed mode:
1. Go to the Setup main level.
2. Select the Fans option.
3. Select the fan mode, from Auto (fan speed adjusts to product temperature), ECO (quiet mode), or
Full (fan speed at maximum).

Display Backlight

To set whether an inactive display will turn off:
1. Go to the Setup main level.
2. Select the Display option.
3. Select OFF (turns off when inactive) or ON (always on).

Screen Reverse

To set the orientation of the display:
1. Go to the Setup main level.
2. Select the Screen Rev option.
3. Select from OFF (right-side up) or ON (upside-down).

Dimmer Curve

To set the dimmer curve:
1. Go to the Setup main level.
2. Select the Dimmer Curve option.
3. Select the dimmer curve, from Linear, Square, I Squa, or SCurve.

Dimmer Speed

To set the dimmer speed mode:
1. Go to the Setup main level.
2. Select the Dimmer Speed option.
3. Select the dimmer curve, from Smooth or Fast.

Pulse-Width Modulation Options

To set the PWM frequency:
1. Go to the Setup main level.
2. Select the PWM Option option.
3. Select the frequency, from 600Hz, 1200Hz, 2000Hz, 4000Hz, 6000Hz, or 15000Hz.

LED Power (Legacy Mode)

To adjust the power for each color of LED, so as to match the output to a legacy Rogue Wash product:
1. Go to the Setup main level.
2. Select the LED R POWER (red), LED G POWER (green), LED B POWER (blue), or LED W
POWER (white) option.
3. Increase or decrease the power of the selected color, from 050–100.
Match each color of the Rogue R1X Wash one at a time with each individual color of the
legacy Rogue Wash product(s). This ensures an equal output and color balance from each
product.
4. Repeat steps 2 and 3 until the output of the Rogue R1X Wash is identical to the output of the
legacy Rogue Wash product(s).

White Mode

To turn the White Mode on or off, or edit the balance of the White Mode:
1. Go to the Setup main level.
2. Select the White Mode option.
3. Select On (to calibrate the color temperature to 7500K), Off (to sets all colors to maximum output),
or Custom (to customize the White Mode).
4. If Custom was selected, then select which color to edit, from RED, GREEN, BLUE, or WHITE.
5. Increase or decrease the maximum output level of the selected color, from 000–255.
Rogue R1X Wash User Manual Rev. 1 Page 21 of 26