Table of Contents
Advertisement
O
PERATION
4. O
PERATION
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to
the
Product Overview
to see the button locations on the control panel.
B
F
UTTON
UNCTION
<MENU>
Press to find an operation mode or to back out of the current menu option
<UP>
Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
<ENTER>
Press to activate a menu option or a selected value
Menu Map
M
L
P
AIN
EVEL
3Ch
DMX Mode
9Ch
19CH
Static Colors
C--
Automatic
P--
Programs
Auto Speed
S--
Sound-Active
Snd
Mode
Custom Color
u--
Mixing
Infrared Mode
SEt
Configuration (DMX)
The Rotosphere Q3 works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer,
which is available from the Chauvet website www.chauvetdj.com.
DMX Personality and Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If you choose a starting address that is too high, you could restrict the access to some of the
product's channels.
The Rotosphere Q3 uses up to 19 DMX channels in a 19CH DMX mode, which defines the highest
configurable address to 494.
If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the DMX Personality, do the following:
1.
Press <MENU> repeatedly until the desired personality shows on the display. (3CH, 9CH or
19CH)
2.
Press <ENTER>.
To select the starting address, do the following:
1.
Select a personality.
2.
Press <MENU> repeatedly until d--- shows on the display.
3.
Use <UP> or <DOWN> to select the starting address.
4.
Press <ENTER>.
Rotosphere Q3 User Manual Rev. 1
L
ROGRAMMING
EVELS
d001–510
d001–504
d001–494
C 1–23
P 1–5
S001–100
Snd1–3
r000–255
g000–255
b000–255
w000–255
S000–100
DI-L
DI-R
M000–100
on
oFF
D
ESCRIPTION
3-channel DMX mode
9-channel DMX mode
19-channel DMX mode
Static colors
Automatic programs
Program speed for P 1–5
Sound-active programs
Custom static colors
Combine red, green, blue, and white
Note: Only three can be used at once
SMD strobe speed
Motor rotation direction (left or right)
Motor rotation speed
Turns infrared on or off
Page 7 of 18
Advertisement
Table of Contents
