Dmx Personality And Starting Address; Dmx Channel Assignments And Values; 10Ch - Chauvet SlimPAR PRO Q USB User Manual

DMX Personality
and Starting
Address

DMX Channel Assignments and Values

Channel Function

10CH

SlimPAR PRO Q USB User Manual Rev. 3
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you
could restrict the access to some of the product's channels.
The SlimPAR PRO Q USB uses up to 10 DMX channels in a 10CH DMX mode, which
defines the highest configurable address to 503.
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetdj.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 4-CH, 5-CH, or 10CH shows on the display.
2. Press <ENTER> and d 1–512 will show on the display.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
1 Dimmer
Red
2
3 Green
4 Blue
Amber
5
Color Macros
6
(Overrides Ch. 2–5)
Strobe
7
Auto Program
8
Speed
(when CH8 is 032–180)
9
Sound Sensitivity
(when CH8 is 181–255)
Dimmer Speed
10
Value Percent/Setting
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 010 No function
011 ó 255 Color macros
000 ó 010 No function
011 ó 255 Strobe, slow to fast
000 ó 031 No function
032 ó 069 Auto program 1
070 ó 106 Auto program 2
107 ó 143 Auto program 3
144 ó 180 Auto program 4
181 ó 217 Sound-active mode 1
218 ó 255 Sound-active mode 2
000 ó 255 Slow to fast
000 ó 010 Off
011 ó 255 Control the sound sensitivity level
000 ó 051 Default dimmer speed set from menu
052 ó 101 Dimmer speed mode off
102 ó 152 Dimmer speed mode 1 (fast speed)
153 ó 203 Dimmer speed mode 2 (medium speed)
204 ó 255 Dimmer speed mode 3 (slow speed)
Page 11 of 19