User Set Mode; Setting The Microphone Gain - Icom IC-V10MR Operating Manual

■ User set mode

The User Set mode enables you to change various settings.
You can "customize" the transceiver operation to suit your
preferences and operating style.

■ Setting the microphone gain

[VOL] to turn the transceiver power OFF.
Rotate
q
Set [ROTARY SELECTOR] to Channel 16.
w
[Upper], rotate [VOL] to turn ON the
While holding down
e
power and enter the microphone gain adjustment mode.
[Upper] or to increase, or push [Lower] to decrease
Push
r
the microphone gain.
• The adjustable range is 1 (minimum) to 4 (maximum).
• A beep sounds after pushing [Upper] or [Lower]. An error
beep sounds if you try to exceed the adjustable range. There-
fore, you can determine the current level setting by the increas-
ing loudness of the beep that sounds.
[VOL] to turn OFF the power, then ON again to exit
Rotate
t
the microphone gain adjustment mode.
NOTE:
• This operation may not be selectable, depending on the
presetting. Ask your dealer for details.
• When using the VOX function, we recommend setting
the microphone gain to 3. However, you can adjust it to
suit your operating environment (including your headset
performance).
BASIC OPERATION
[ROTARY SELECTOR]
[Upper]
[Lower]
2
[VOL]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
10