Volkswagen Golf 2004 Workshop Manual page 208

Golf 2004 ➤
General body repairs, exterior - Edition 04.2008
– Remove window regulator motor and control unit -1- from
mounting plate.
2.6.2 Installing
– Place window regulator motor -1- on and attach connectors
-arrows-.
– Move door window lightly up and down so that the splines be‐
tween motor and cable drum engage easier.
– Tighten window regulator motor bolts -2- specified torque (3.5
Nm).
– Run window twice to upper stop and then down to lower stop.
This normalises and readies the window, it also activates the
pinch/roll-back function.
Then perform remaining installation in reverse order of removal.
200
Rep. Gr.64 - Glazing