Removing And Installing Bonnet Lock - Volkswagen Golf 2004 Workshop Manual

1.9

Removing and installing bonnet lock

1.9.1 Removing
– Open bonnet.
Depending on model
– Remove radiator grille
– Remove GTI radiator grille
– Remove R32 radiator grille
All models
– Separating Bowden cable
– Separate connector -5- for bonnet contact switch -F 266- .
The connector is secured over the right headlight.
– Remove bolts -4- (Qty. 3) on lock carrier -3- and remove bon‐
net lock -1- upwards.
– To unclip Bowden cable -2-, press tab and Bowden cable to‐
gether -arrows-.
– The fastening is released and the Bowden cable -2- can be
removed from the bonnet lock -1-.
1.9.2 Installing
– Clip Bowden cable -2- into bonnet lock -1-.
– Install bonnet lock -1- in lock carrier -3-.
– Specified torque for bolts -4-: 12 Nm.
– Connect connector -5- for bonnet contact switch -F 266- .
– Install Bowden cable -2-
– Adjust bonnet lock ⇒ page 27
• Before closing the bonnet, check the function of the release
lever and Bowden cable.
⇒ page 230 ,
⇒ page 233 ,
⇒ page 237 .
⇒ page 26
⇒ page 26 .
.
General body repairs, exterior - Edition 04.2008
Golf 2004 ➤
25
1. Bonnet