Golf 2004 ➤
General body repairs, exterior - Edition 04.2008
1 - Side impact protection
2 - Bolts
❑ Qty. 2
❑ 20 Nm
3 - Nut
❑ Qty. 2
❑ 20 Nm
4 - Door inner part
1.20
Door inner seals
During production, a sealant is applied to the door inner seals,
which are then placed on the door flange and rolled on.
Note
When seals are removed, the sealant will spread to the inside
♦
of the seal and the flanks will be bent out slightly. If the seal is
then refitted, a tight seal is not guaranteed.
Therefore each seal which is removed completely should be
♦
replaced by a so-called "tap-on" seal.
If a seal has been partially removed, squeeze sides of seal
♦
together before installing.
112
Rep. Gr.58 - Rear doors, door components