Golf 2004 ➤
General body repairs, exterior - Edition 04.2008
1.6
Adjusting door
Note
The door is adjusted correctly if the gaps/shut lines are even
♦
all around, the door is not too deep or does not stand proud
and all contours align when the is door closed.
Vehicle must be standing on its wheels on flat level ground
♦
when adjustments are performed.
If door outer panel has been removed, door inner part window
♦
frame must be adjusted to roof frame and B-pillar, or rear door.
1.6.1
Adjusting door gaps
Special tools and workshop equipment required
♦ Box spanner 15 mm -T10344-
WARNING
Vehicles up to 01.2004, the bolt of the eccentric pin -10- must
not be loosened and the eccentric pin -15- must not be used
to adjust the door.
52
Rep. Gr.57 - Front doors, door components, central locking