Assembly Overview - Window Regulator Motor - Volkswagen Golf 2004 Workshop Manual

Golf 2004 ➤
General body repairs, exterior - Edition 04.2008
– Applying light pressure press door window -1- in clamping
jaws in -direction of arrow- and align door window tension free
at rear window guide.
– When doing so, ensure that door window -1- is positioned par‐
allel to window guide.
– Tighten clamping jaws by turning bolts -3- to left from interior.
Specified torque for bolt: 8 Nm.
• Then check for correct operation.
Further installation is performed in the reverse order of removal.
2.5

Assembly overview - window regulator motor

Note
The right side is shown. The left side is similar.
1 - Window regulator motor
❑ Removing and installing
⇒ page 199
2 - Bolt
❑ Qty. 3
❑ 3.5 Nm
198
Rep. Gr.64 - Glazing