Table of Contents
Advertisement
The blade makes a clicking noise.
Bad weld. Dress the weld or change the blade.
Blade overheats.
1. Dull blade. Change the blade or resharpen the blade.
2. Pitch is too small for the depth of cut. Change to a blade with the correct pitch.
3. Guides too tight. Adjust the guides.
4. Wood too hard for the selected blade. Change the blade.
5. Blade too thick for the diameter of the wheels. Change the blade.
Machine vibrates.
1. Machine not level on the floor. Re-level the machine ensuring that it has no movement.
2. Damaged drive belt. Replace the belt.
LT14BX (MBAND14BX110-0175)110V wiring diagram.
53
Hide quick links:
Advertisement
Table of Contents
