Table of Contents
Advertisement
Allen key
Support Allen screw
Fence in high position
The fence support and the fence are held off the table with a nylon-support Allen screw. This
screw ensures that the fence and the fence support do not damage the table. The screw is
adjustable to compensate for wear.
Note. The fence clamp screw is shown removed.
Fitting the table insert.
The machine is supplied with a removable table insert that
is held in position with a screw. The table insert is removed
when blades are removed or fitted to the machine. The
insert is made of soft aluminium so that if the blade wanders
and contacts the insert, there is less chance of damaging
the blade. Adjusting screws are provided to adjust the insert
vertically level with the table. The insert comes factory set,
but should adjustment become necessary, place the insert
in the table with the screw fitted. Place a straight edge
across the table and insert and adjust the screws so that
Table insert
the table insert is level with the top of the table.
24
Hide quick links:
Advertisement
Table of Contents
