Table of Contents
Advertisement
SPRING AND COULD CAUSE INJURY.
Your bandsaw will be shipped in custom packaging consisting of a heavy-duty cardboard box
and Styrofoam internal packaging.
1. Open the cardboard box and remove the loose parts and top Styrofoam.
2. Lift the bandsaw out of the packaging. You will need two or more people, as the bandsaw
is heavy.
3. Lift the bottom Styrofoam out and remove the parts that are packaged under the bandsaw
and packaging.
Assembly and set up.
Assembling the rubber feet.
Method 1.
Fit the rubber feet to the bandsaw
prior to removing it from the
packaging.
Method 2.
1. Support the bandsaw on
wooden blocks.
2. Assemble the rubber feet with
the fixings provide both at front
and back of the bandsaw.
Assembling the optional mobility kit
Bandsaw supported on wooden block
Rubber feet
19
Hide quick links:
Advertisement
Table of Contents
