Assemble/Secure Arm To Pinion; Secure Adjusting Rod And Arm Slide Tube - Norton 6000 Series Installation And Instruction Manual

8
Assemble Arm to Pinion
A. i)Slide Adjusting Rod into Tube of Arm Slide and
Tube Assembly. ii) Place square of Main Arm
onto pinion with pinion flat and arm marking as
shown below.
9
Secure Arm to Pinion
A. Secure Main Arm to
Pinion with provided
screw.
B. Tighten arm screw with
7/16" wrench.
10

Secure Adjusting Rod and Arm Slide Tube

A. Rotate Main Arm away from hinge
until Adjusting Rod and Arm Slide
Tube are perpendicular (at 90
degrees) with the door.
B. Secure with forearm screws.
Copyright © 2015 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
Pinion Flat
Arm Marking
Main Arm Screw
Adjusting Rod
Arm Slide Tube
Forearm Screw
Page 8
Main Arm
ii
Main Arm
Pinion
90°
ASSA ABLOY
Arm Slide
Tube
i
Adjusting Rod
Main Arm
80-9360-1003-020 (08-15)