Radio Frequency Standard/Executive Function Wiring - Norton 6000 Series Installation And Instruction Manual

Radio Frequency Standard Function Wiring (can be ordered pre-wired to this RF wiring)
If installing in the field, change Factory Pre-Wiring from Illustration A to Illustration B
A)
Radio Frequency Standard
Function
Ÿ Doors are normally closed.
Activating wireless switch or hand
Ÿ
held wireless transmitter will open
the door.
The door will closer after hold open
Ÿ
time delay has elapsed.
Current draw at Power Outputs
Ÿ
not to exceed 1.3 amps.
Radio Frequency Executive Function Wiring
Change Factory Pre-Wiring from Illustration A to Illustration B
A)
Radio Frequency Executive
Function
Ÿ Doors are normally closed and
latched.
Activating wireless switch or hand
Ÿ
held wireless transmitter will open
the door.
The door will remain in indefinite
Ÿ
hold open until wireless switch or
hand held transmitter is activated a
second time causing the door to
close.
Current draw at Power Outputs
Ÿ
not to exceed 1.3 amps.
Copyright © 2015 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
B)
Optional second
Low Energy
Power Operator
B)
Optional second
Low Energy
Power Operator
Page 18
ASSA ABLOY
If installing RF
in the field,
attach receiver
to bracket as
shown with
Velcro strips
supplied.
Aux1
GND
Pres Det
GND
Aux2
GND
Door Toggle
GND
Aux1
Aux3
GND
Aux2
No Conn
Blow Open
If installing RF
in the field,
attach receiver
to bracket as
shown with
Velcro strips
supplied.
80-9360-1003-020 (08-15)