Contacting Customer Support To Obtain Return Material Authorization; Figure 45: Location Of The Serial Number Id Label On A Dc Power Supply Used In An Ocx1100 Switch; Figure 46: Location Of The Serial Number Id Label On The Fan Module Used In An Ocx1100 Switch - Juniper OCX1100 Hardware Manual

OCX1100 Switch Hardware Guide
Related
Documentation

Contacting Customer Support to Obtain Return Material Authorization

130
Figure 45: Location of the Serial Number ID Label on a DC Power Supply
Used in an OCX1100 Switch
SN:
Fan module—The serial number ID label is on the front bottom lip of the fan module.
Figure 46 on page 130 shows the location of the serial number ID label. See
a Fan Module from an OCX1100 Switch" on page
Figure 46: Location of the Serial Number ID Label on the Fan Module Used
in an OCX1100 Switch
Contacting Customer Support to Obtain Return Material Authorization on page 130
Returning an OCX1100 Switch or Component for Repair or Replacement on page 127
If you are returning a device or hardware component to Juniper Networks for repair or
replacement, obtain a Return Material Authorization (RMA) number from Juniper Networks
Technical Assistance Center (JTAC).
After locating the serial number of the device or hardware component you want to return,
open a Case with Juniper Networks Technical Assistance Center (JTAC) on the Web or
by telephone.
Before you request an RMA number from JTAC, be prepared to provide the following
information:
"Removing
106.
Copyright © 2017, Juniper Networks, Inc.