Screen; Figure 96 802.1X; Table 55 802.1X - ZyXEL Communications IES-1248-51V User Manual

Hd digital surveillance monitor

Hide thumbs Also See for IES-1248-51V:

Table of Contents

Chapter 26 Port Authentication

26.3 802.1x Screen

To open this screen, click Advanced Application > Port Authentication >

The following table describes the labels in this screen.

Reauthentication

Select this check box to turn on IEEE 802.1x authentication on the

Click Apply to save your changes to the IES's volatile memory. The

IES loses these changes if it is turned off or loses power, so use the

Config Save link on the navigation panel to save your changes to the

non-volatile memory when you are done configuring.

Click Cancel to begin configuring this screen afresh.

This field displays a port number.

Select this check box to turn on IEEE 802.1x authentication on this

Select Auto to authenticate all subscribers before they can access the

network through this port.

Select Force Authorized to allow all connected users to access the

network through this port without authentication.

Select Force Unauthorized to deny all subscribers access to the

network through this port.

Specify if a subscriber has to periodically re-enter his or her

username and password to stay connected to the port.

Specify how often a client has to re-enter his or her username and

password to stay connected to the port.

IES-1248-51V User's Guide

Troubleshooting