Ordering Information - ABB REF 610 Technical Reference Manual

REF 610
6.
146
Feeder Protection Relay
Technical Reference Manual - ANSI Version

Ordering information

When ordering REF 610 protection relays and/or accessories, please specify the
following:
• Order number
• Quantity
The order number identifies the protection relay type and hardware as described in
the figures below and is labelled on the marking strip under the lower handle of the
relay.
Use the ordering key in Fig. 6.-1 to generate the order number when ordering
complete protection relays. HMI language set numbers, and corresponding
terminology and languages included, are described in Table 6-1.
REF610B55HCNP XX
Fig. 6.-1 Ordering key for complete relays
Use the ordering key in Fig. 6.-2 to generate the order number when ordering spare
units. HMI language set numbers, and corresponding terminology and languages
included, are described in Table 6-1.
Language set: HMI language set number
Communication module: P = plastic fibre
M = plastic fibre with input for arc protection
G = plastic and glass fibre
K = plastic and glass fibre with input for arc protection
R = RS-485
T = RS-485 with input for arc protection
D = RS-485 including DNP 3.0 protocol
E = RS-485 including DNP 3.0 protocol and
input for arc protection
N = none
I/O extension module: H = 3xSO and 3xDI (110/125/220/250 V dc)
L = 3xSO and 3xDI (24/48/60/110/125/220/250 V dc)
N = none
Power supply: H = 100-240 V ac/110-250 V dc, 2xDI
(110/125/220/250 V dc), 3xPO, 2xSO
L = 24-60 V dc, 2xDI (24/48/60/110/125/220/250 V dc),
3xPO, 2xSO
Ground-fault current input: 5 = 5A, 1=1A, 2=0.2A
Phase-current inputs: 5 = 5A, 1=1A
Revision
1MRS 755535