Installing The 6Y8 Multifunction Meter Harness; Installing The Conventional Gauge Harness - Yamaha F150A Service Manual

6. Install the clip "1", and then tighten the
throttle cable locknut "2" to the specified
torque.
1
Throttle cable locknut "2":
5 N·m (0.5 kgf·m, 3.7 ft·lb)
7. Check the throttle cable for proper opera-
tion.
Installing the 6Y8 Multifunction
Meter harness
1. Remove the cap "1".
1
2. Connect the 6Y8 Multifunction Meter har-
ness coupler "a".
a
3. Remove the yellow tape "1" and caps "2".
2
3-12
Rigging grommet mounting
2
4. Connect the trim sensor coupler "a".
a
Installing the conventional gauge
harness
1. Remove the gauge harness coupler "a"
from the bracket "1".
1
a
2. Remove the cap "1".
1
3. Connect the gauge harness coupler "a".
1
0
1
2
3
4
5
6
7
8
9
10
A