Installing The Ignition Coil; Installing The Rectifier Regulator - Yamaha F150A Service Manual

Installing the ignition coil

1. Install the ignition coils "1", and then
tighten the ignition coil bolts "2" to the
specified torque.
2. Install the wiring harness "3" to the hold-
ers "4", and then connect the ignition coil
couplers "a".
3
4
a
Ignition coil bolt "2":
7 N·m (0.7 kgf·m, 5.2 ft·lb)
3. Install the spark plug wires "1", "2", "3",
and "4", and then fasten them using the
holders "5", "6", and "7".
6
5

Installing the Rectifier Regulator

1. Install a new gasket "1" and the Rectifier
Regulator "2".
a 2
1
2 2
1
1
7
5
3
4
7
Rectifier Regulator and ignition coil
2
2. Connect the Rectifier Regulator coupler
"a", and then install the ground lead "1".
2
7-26
1
1
a