Table of Contents
Advertisement
Light control
Low / High beam
This function allows you to reduce current
consumption from the battery, by managing
headlight switching-on and off.
At Key-On, the high beam and low beam lights are
off, only the parking lights are turned on.
Once the engine is started, the low beam is turned
on; with engine running the standard operation of the
lights is restored: it is possible to switch on and off
the high beam using button (1) in position (A), or flash
using button (1) in position (B). If the engine is not
started after key-on, it is still possible to turn on the
low/high beam by pressing button (1) in position (A)
on the left switch; press it once to turn on the low
beam; any further time you press it you switch
between low and high beam.
232
A
1
B
3
5
Fig 138
Advertisement
Table of Contents
