Table of Contents
Advertisement
Menu 1: LAP time
The LAP function is only available for the display
layout with standard screen in TRACK mode. LAP
function information is available when the function is
active. When selecting screen view in TRACK mode,
the LAP function is displayed automatically: it is
always possible to later view the other Menu 1
options. When the LAP function is activated, the lap
timer is displayed indicating "0'00''00" as well as the
LAP number with first indication "LAP – – ".
When the FLASH button (3) is pressed for the first
time, the lap timer starts with a tenth-of-a-second
resolution (0'00''0) and the LAP number in progress
is displayed. Every time the FLASH button (3) is
pressed again, the display temporarily shows the
number and time of the just-ended lap, then it will
show the lap timer and number of the new current
lap: even if the "LAP" function is not displayed, the lap
is displayed for 5 seconds all the same and then the
selected function will be displayed (e.g. LEAN).
If lap timer is active but vehicle is at standstill, the lap
timer is temporarily stopped after 5 seconds and it is
displayed with the initial indication "0'00''00" and lap
number "LAP – –". The next time rider pushes the
FLASH button (3), the lap timer is reactivated.
107
Advertisement
Table of Contents
