Table of Contents
Advertisement
DTC - DWT - EBC function level quick
change
The instrument panel allows the rider to quickly
change the level set for one of the DTC, DWC or EBC
functions, by means of the UP + (5) and DOWN − (6)
buttons on the auxiliary LH switch.
Attention
Using the UP or DOWN buttons while riding
could result in dangerous situations, since it
immediately changes the triggering threshold of the
currently associated function: traction control (DTC),
wheelie control (DWC), engine brake control (EBC).
On your vehicle this setting can be changed while
riding, regardless of the throttle twistgrip position:
use this control carefully in order to avoid any
dangerous situation. You are advised against using
the UP or DOWN buttons while riding the motorcycle.
Ducati shall not be liable for any loss or damage
whatsoever linked to or connected with the
Customer or third parties disabling or manually
setting the riding aid functions.
The function associated with the UP + (5) and DOWN
− (6) buttons must be set through the Setting Menu.
The rider is always aware of which function is
currently associated with the UP + (5) and DOWN −
(6) buttons since it is highlighted on the main screen
with a thicker border line.
Note
Quick selection UP ( + ) and DOWN ( − ) buttons
are active only for the RACE Riding Mode.
Note
Any new level set by means of the UP ( + ) and
DOWN ( − ) buttons is stored in the RACE Riding
Mode as new setting for the associated function.
95
Advertisement
Table of Contents
