Side Fairings - Ducati SUPERBIKE 1299 PANIGALE S Owner's Manual

Side fairings

To remove the fairings, use the Allen wrench fitted
under the seat to loosen the following:
- the two screws (1) securing the fairing panels to
the brackets;
- the four screws (2) securing the fairing panels to
the headlight fairing;
- the three screws (3) securing the fairing panels
to the frame;
- the two screws (4) located under the fairing that
join the right fairing panel to the left fairing panel;
- the two screws (5) securing the fairing panels at
the center;
- the two screws (6) securing the front of the
fairing to the headlight fairing.
Note
Be careful of the splash guard, which is released
by the fairing panel fastening.
Note
To refit the left fairing panel, lower the side
stand and pass it through the hole in the panel.
282
2
4
6
3
5
1
4
Fig 179
Fig 180