Removing A Hard Drive From A Hard-Drive Carrier - Dell PowerVault NX3500 Hardware Owner's Manual

Removing a Hard Drive From a Hard-Drive Carrier

CAUTION:
Use only hard drives that have been tested and approved for use with
the SAS/SATA backplane.
CAUTION:
When installing a hard drive, ensure that the adjacent drives are fully
installed. Inserting a hard-drive carrier and attempting to lock its handle next to a
partially installed carrier can damage the partially installed carrier's shield spring
and make it unusable.
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See Figure 2-6.
Figure 2-6. Removing and Installing a Hard Drive
1
4
1 screws (4)
3 SAS/SATA screw hole
2 hard drive
4 hard-drive carrier
Installing System Components
2
3
59