Disabling A Forgotten Password - Dell PowerEdge R520 Owner's Manual

Hide thumbs Also See for PowerEdge R520:
Table of Contents

Advertisement

Item
Connector
15
FAN5
16
B1, B4, B2, B5, B3, B6
17
FAN4
18
FAN3
19
PWR_CONN_1
20
FAN2
21
A1, A4, A2, A5, A3, A6
22
BP_SIG
23
PWR_CONN_2
24
CPU1
25
PDB_CONN
26
SATA_A-D
27
CTRL_PNL_MB
28
SATA_E
29
FP_USB
30
SAS_A
31
IDSDM
32
SAS_B

Disabling A Forgotten Password

The system's software security features include a system password and a setup password. The password jumper
enables these password features or disables them and clears any password(s) currently in use.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1.
Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2.
Open the system.
3.
Move the jumper on the system-board jumper from pins 4 and 6 to pins 2 and 4.
4.
Close the system.
The existing passwords are not disabled (erased) until the system boots with the Jumper on pins 2 and 4. However,
before you assign a new system and/or setup password, you must move the jumper back to pins 4 and 6.
NOTE: If you assign a new system and/or setup password with the jumper on pins 2 and 4, the system disables
the new password(s) the next time it boots.
5.
Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
6.
Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
Description
Cooling fan connector
Memory module sockets
Cooling fan connector
Cooling fan connector
8-pin power connector
Cooling fan connector
Memory module sockets
Backplane signal connector
24-pin power connector
Processor socket 1
Power distribution board connector
SATA connector A to D
Control panel interface connector
Optical drive SATA connector
Front panel USB connector
Mini-SAS connector
Internal Dual SD Module
Mini-SAS connector
115

Advertisement

Table of Contents
loading

This manual is also suitable for:

E19s001

Table of Contents