Hard-Drive Indicator Patterns - Dell DR4100 Owner's Manual

PCIe indicator
Condition
The indicator blinks
amber if a PCIe card
experiences an
error.

Hard-Drive Indicator Patterns

The following topic describes the hard-drive indicator patterns of the Dell DR4100 system.
Figure 2. Hard-Drive Indicators
1. hard-drive activity indicator (green)
2. hard-drive status indicator (green and amber)
NOTE: If the hard drive is in Advanced Host Controller Interface (AHCI) mode, the status indicator (on the right side)
does not function and remains off.
Drive-Status Condition
Indicator Pattern
(RAID Only)
Blinks green two Identifying drive or preparing for removal
times per second
Off Drive ready for insertion or removal
Blinks green, amber, Predicted drive failure
and off
Blinks amber four Drive failed
times per second
Blinks green slowly Drive rebuilding
10
Corrective Action
Restart the system. Update any required drivers for the PCIe card.
Re-install the card. If the problem persists, see
NOTE: The drive status indicator remains off until all hard drives are initialized after the
system is turned on. Drives are not ready for insertion or removal during this time.
Getting Help.