Carel pCO5+ User Manual page 55

Function
UPLOAD an application or a BIOS fi le
plus an application
UPLOAD non-volatile memory (.dev)
UPLOAD the entire contents of the pCO Copy pCO upload
After the description of the desired function, various options are available:
1. To copy the complete contents of the directory, simply write the
name of the directory (e.g. the entire contents of the CHILLER
directory):
[FUNCTION]
Upload non volatile memory
[DIR]
CHILLER
2. To copy just 1 fi le in a directory, enter the fi le's name (e.g. the
CHILLER.DEV fi le in the CHILLER directory).
[FUNCTION]
Upload non volatile memory
[DIR]
CHILLER
CHILLER.DEV
To show a string on the display describing the operation being
performed, add the "[NAM]" instruction, followed by the string to display.
The following fi le will display the string:
"UPL CHILLER.DEV"
[FUNCTION]
Upload non volatile memory
[DIR]
CHILLER
[NAM]
UPL CHILLER.DEV
CHILLER.DEV
3. To select only some of the fi les in the same directory, list them after
a label. The following labels are allowed and must be entered in
the order shown in the table:
UPLOAD fi le labels
No. Label File type
1 [BIO] (*) fi le.bin
2 [IUP] fi le.iup
3 [BIN] fi le.bin, blb
4 [DEV] fi le.dev
5 [GRP] fi le.grp
(*) BIO = BIOS fi le
String
Upload application
Upload non volatile memory
No. Label File type
6 [PVT] fi le.pvt
7 [LCT] fi le.lct
8 [OED] fi le.oed
9 [SGN] fi le.sgn
Notes:
•
to get the .bin file from the BIOS in the format available on http://ksa.
carel.com (.os file), unzip the .os file;
•
the [IUP] label can be followed by one or more ".iup" files.
Important:
•
the order in which the fi le names are entered is fundamental and must
not be changed;
•
do not enter empty lines or spaces in the fi le (e.g. at the end of a line);
•
each fi le after the last line of code must contain a "carriage return"
character (CR ), as shown in the following example.
•
Example: The following fi le will upload the BIOS and an application.
[FUNCTION]
Upload application

[DIR] 
NEW AHU 

[NAM] 
BIOS+APPL+LOGSv58B36 

bisn509.bin 

[IUP] 
AHU_EN.iup 
AHU_IT.iup 

[BIN] 
AHU.blb 

[DEV] 
AHU.dev 

[GRP] 
AHU.grp 

[PVT] 
AHU.pvt 

[LCT] 
AHU.lct 
Automatic upload
To automatically upload the parameter memory using the fi rst
confi guration fi le shown in the preceding paragraph, access the system
menu as previously described and proceed as follows:
1. Select automatic mode. A screen is shown describing the function
of the buttons. Press Enter to confi rm.
55
ENG
Fig. 9.o
pCO5plus +0300020EN rel. 1.2 - 07.11.2013