Carel pCO5+ User Manual page 40

ENG
2. LOG DATA: Selecting this function allows any logged data on
the pCO to be viewed. If no log is present, the following screen is
displayed.
0
N O L O G D A T A
P R E S S
[ M E N U ]
If at least one log is present, the fi rst screen displayed is similar to the
following.
1 D I S P L A Y
W h i c h
I N T E R N A L
Detailed information on the screens relating to the logs is provided in the
pCO Manager manual.
3. OTHER INFORMATION: Selecting this function lets you view the ID
number assigned to the pCO, confi gure the pCOnet/pCOweb cards
and view the status of the buff er memories (T), the parameters (P)
and the clock (E).
> I D N U M B E R
P C O W E B / N E T
M E M O R I E S
The ID number is a code, diff erent for each pCO manufactured by CAREL,
and is available for use in future applications. Not all pCO units are given
an ID number by CAREL; if no ID number is available, the following screen
is displayed.
> P C O W E B
P C O N E T
See the Appendix for information on confi guring the PCOnet and
PCOweb cards.
The status of the buff er memories (T), the parameters (P) and the clock (E)
is displayed as follows. Select a memory to view its status.
> T M E M O R Y
P M E M O R Y
E M E M O R Y
4. FLASH/ USB MEMORY: Selecting this string displays the following
screen.
> N A N D F L A S H
U S B P E N
The fi rst selection lets you view the names of the IUP, BLB, GRP and DEV
fi les contained in the NAND memory. You can also copy an application
from the NAND memory to the pCO's main fl ash memory. Each fi le name
is shown on a screen such as the one below.
[ X ]
P G D 2 3 _ A L L . g r p
pCO5plus +0300020EN rel. 1.2 - 07.11.2013
O R [ E S C ]
L O G D A T A
m e m o r y ?
M E M O R Y
I N F O
C O N F I G
S T A T U S
s e t t i n g s
s e t t i n g s
S T A T U S
S T A T U S
S T A T U S
F I L E S
D R I V E
To move from one fi le to another press the UP or DOWN button. Press
ENTER to select the current fi le to copy to the main fl ash memory. The
fi les selected to be copied are marked by an "X" on the fi rst line of their
respective screens. In the example shown, the "PGD23_ALL.grp" fi le is
selected to be copied. To start the copy, press UP or DOWN until the
following screen appears:
P r e s s
t o s t a r
and then press ENTER to confi rm.
See the pCO Manager manual for further information on using the NAND
memory.
To exit these two screens press Menu on the local terminal or wait around
40 seconds for automatic timeout.
For information on the screens related to the pendrive, see paragraph
9.3. If the pendrive is non connected, the following message is displayed:
N o U S B
c o n n e c t e d
P r e s s
i n s e r
40
E n t e r
t c o p y i n g
d i s k o r P C
E S C o r
t k e y / c a b l e