Mounting As A Network Drive - Buffalo TeraStation 5010 User Manual

Name
To display these
options, hold down
the control key
and select your
TeraStation's icon.
The following tasks may be performed from the LinkStation's or TeraStation's properties page.
Name
Configuration
IP Address

Mounting as a Network Drive

You can map a shared folder as a network drive using NAS Navigator2 on macOS.
1
Click the
Open Folder
Settings
Configure
I'm here
Label Color
Description
Click Settings to open the configuration interface.
Select the Use DHCP checkbox to assign an IP address from the DHCP server
automatically. If there is no DHCP server on the network, you cannot use this
function.
Select the Renew IP address checkbox to obtain an IP address from the DHCP server.
You can manually enter an IP address, subnet mask, and default gateway.
icon in the Dock to start NAS Navigator2.
Description
Opens the selected LinkStation's or TeraStation's shared
folder.
Opens Settings for the selected LinkStation or TeraStation.
Opens a window that lets you configure the NAS's IP
address or open Settings.
Causes your LinkStation or TeraStation to beep.
Selects the color of the name displayed below the icon.
160