7
Choose a RAID array.
8
Select a RAID mode and the drives to be used, then click Create RAID Array.
9
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
10
Click OK when finished.
Notes:
• You can also configure RAID settings from Easy Admin.
• After changing the RAID mode, create a shared folder.
Configuring a Hot Spare
If you have a hot spare configured and an array fails, the TeraStation immediately switches over to the hot spare. To
use a hot spare, you need an extra drive that's not part of any array and a RAID 1 or RAID 5 array.
38