10
Click the RAID tab and the RAID array to make the capacity larger.
11
Click Expand.
12
Read the warning message carefully and click Yes.
13
The RAID array will be rebuilt and its capacity will expand. The power LED will blink amber and I18 and I46
messages will be displayed. Wait until those messages disappear and the power LED returns to a steady white.
Adding an External Hard Drive
The LinkStation includes a USB port and you can connect an external drive or USB storage device to this port. For
external drives, Buffalo USB drives are recommended. The following file systems for external drives are supported:
ext2, ext3, ext4, FAT32, exFAT, NTFS, HFS Plus
Connect only one device to a USB port. Some external drives with automatic power-on doesn't turn on
automatically when connected to the LinkStation. Use their manual switch to turn them on. Be sure to connect only
one bus-powered drive at a time. If there is insufficient bus power for your USB drive, connect its AC adapter.
40