3
Clear the "Use DHCP" checkbox and enter the desired settings, then click OK. If the username and password
prompt appears, enter the admin username and password.
Note: The following IP addresses are reserved and should not be used. If you configure one of them by accident,
initialize all settings using the init button on the TeraStation.
Local loopback address: 127.0.0.1, 255.255.255.0
Network address: 0.0.0.0, 255.255.255.0
Broadcast address: 255.255.255.255, 255.255.255.0
The IP address range from 224.0.0.0 to 255.255.255.255
NAS Navigator2 for Mac
NAS Navigator2 is a utility program that makes it easy to display Settings, change the TeraStation's IP address, or
check its drive. To install NAS Navigator2, download the installer from http://d.buffalo.jp/TS5010/.
To launch it, click the
icon in the Dock.
158