Chapter 2 Configuration; Setting Up Through Initial Setup Wizard - Buffalo TeraStation 5010 User Manual

Chapter 2 Configuration

Configure and manage your TeraStation using the Settings interface, accessible from a browser window. Open the
interface using the procedure below or type the TeraStation's IP address in the URL field of your browser. Within
Settings, the Easy Admin page gives you quick access to commonly used settings.
Note: Microsoft Edge, Firefox, Google Chrome, Internet Explorer 9 or later, and Safari 9 or later are supported. If
you have difficulty viewing Settings, check the following:
• If there are a large number of registered users, groups, or shared folders, use another browser instead of
Internet Explorer.
• If you have a proxy server enabled in the browser settings, disable the proxy server.
• With Internet Explorer, set security to Local intranet. On Windows Server operating systems, higher-level
security is configured by default. Set the security to a lower level temporarily.
• On a Mac, you can also use Bonjour to log in to Settings. Navigate to Bookmarks - Bonjour - TeraStation name
from the menu bar of Safari. If you don't see "Bonjour" in the Bookmarks menu, click Safari - Preferences and
select "Include Bonjour in the Bookmarks menu" under "Advanced".

Setting Up Through Initial Setup Wizard

When you access Settings for the first time, or after initializing the TeraStation's settings, the initial setup wizard will
be displayed. To set up the TeraStation using the wizard, follow the procedure below.
1
Double-click the
2
Right-click on your TeraStation's icon in NAS Navigator2 and select Settings. For macOS, click your TeraStation's
icon while holding down the control key, then select Settings.
icon to start NAS Navigator2.
15