Saving And Applying Settings - Buffalo TeraStation 5010 User Manual

2
Click to the right of "SNMP".
3
Click Edit.
4
Choose whether to use SNMP version 2 or version 3.
5
Configure the desired settings, then click OK.
6
Move the SNMP switch to the
7
SNMP has been configured for the TeraStation. For further use, configure your SNMP-compatible network
management software using the Buffalo-specific MIB (management information base) file. The MIB file is
available from the Buffalo website.
Depending on which SNMP client software you use, the procedure for configuring the software will differ. For
more detailed information on configuring the client software, refer to its help or included manual.

Saving and Applying Settings

The TeraStation's settings can be saved to a USB drive and restored to another TeraStation of the same series. Use
this function to back up and copy settings to a new TeraStation.
position to enable SNMP.
117