Replication - Buffalo TeraStation 5010 User Manual

Code Description
The backup destination files
Code 24 were updated while the
backup job was running.
The Ethernet cable was
disconnected from the
Code 30 backup source or destination
TeraStations while the backup
job was running.
Insufficient TeraStation
B14
memory.
B101
The backup destination
TeraStation does not exist.
B102
The backup source folders on
B103 the backup source TeraStation
do not exist.
The backup destination folders
B104 on the backup destination
TeraStation do not exist.
The drives were not
B105
recognized.
The file systems of the USB
B106
drive are not supported.
The device files such as "/dev/
B107
null" etc. does not exist.

Replication

Replication copies all data from a share to a share on a different TeraStation. This is an easy way to configure a
reliable system to provide data protection in the event your main TeraStation fails. To configure replication, connect
an Ethernet cable to the LAN port of each TeraStation and follow the procedure below.
Corrective Action
Do not overwrite the backup
destination files while the backup job
is running. If updated, the backup
destination files will not be backed up
and the backup job will fail.
Reconnect the Ethernet cable.
Restart the TeraStation and try again.
Verify that the backup destination
TeraStation is turned on, the Ethernet
cables are connected properly,
and the hostname of the backup
destination TeraStation is not
changed.
Verify that the backup destination
folders on the backup destination
TeraStation exist in the shared folder
list and the backup destination
folders are configured for backup
from Settings.
Verify that the backup source folders
on the backup source TeraStation
exist in the shared folder list.
Verify that the backup destination
folders on the backup destination
TeraStation exist in the shared folder
list.
Verify that the drives are recognized
properly from Settings. If you
configure the "usbdisk" folders for
the backup source or destinations,
confirm if these folders exist in the
shared folder list.
Verify that the USB drive are
formatted to the compatible file
systems. If you configure the
management backup in the backup
job, FAT format cannot be used for the
backup destination.
Restart the TeraStation and try again.
72
Log Example
rsync warning:
some files vanished
before they could be
transferred (code 24)
at main.c
rsync error: timeout
in data send/receive
(code 30) at io.c(195)
[sender=3.1.0]
-
-
-
-
-
-
-
-