Mount As Network Drive - Buffalo LS410D User Manual

Exit
The following tasks may be performed from the LinkStation's properties page.
Name
Configuration
IP Address

Mount as Network Drive

You can easily map a shared folder as a network drive using NAS Navigator2.
1
Double-click the
NAS Navigator2 will start.
2
Right-click on the LinkStation's icon, then click Map Share.
Note: The following shared folders can be mounted as network drives from NAS Navigator2: share, share2, share3,
share4, usbdisk1, usbdisk2, usbdisk3, usbdisk4, usbdisk5
3
An icon for the mapped share will appear in Computer or My Computer. You can use this network drive just like
Description
Click Settings to open the configuration interface.
Check Use DHCP to assign an IP address from the DHCP server automatically. If there is
no DHCP server in the network, you cannot use this function.
Check Renew IP address to obtain an IP address from the DHCP server.
You can manually enter an IP address, subnet mask, and default gateway.
icon on the desktop.
Exits NAS Navigator2.
80