3
Clear the "Use DHCP" checkbox; enter the desired settings and the administrator password, then click Apply.
Note: The following IP addresses are reserved and should not be used. If you configure one of them by accident,
initialize all settings using the init button on the TeraStation.
Local loopback address: 127.0.0.1, 255.255.255.0
Network address: 0.0.0.0, 255.255.255.0
Broadcast address: 255.255.255.255, 255.255.255.0
The IP address range from 224.0.0.0 to 255.255.255.255
NovaBACKUP
NovaBACKUP is a Windows utility that lets you back up the data on your computer.
The NovaBACKUP installer is available from http://d.buffalo.jp/TS5010/. Select the region and model to go to your
specific model's d.buffalo website. Download the NovaBACKUP installer and install it onto your computer.
To download the installer, you will need the serial number of your TeraStation. The serial number is printed on the
label on the back or top of the unit. For your rackmount model, the serial number is located in front as well. Refer to
the "Diagrams" section in chapter 1 for the information where the serial number is located.
162