4
Enable "Share Link to Logs".
5
Click Browse and select the shared folder where the link will be created in "Target Shared Folder". Click OK.
6
Click OK.
Under the selected shared folder, a folder named "system_log" will now contain the logs.
Updating the Firmware
If a new firmware is available, a message is displayed when the TeraStation boots. You can update the firmware
either manually or automatically.
Notes:
• If all drives and RAID arrays on the TeraStation have LVM enabled but no LVM volumes have been created, you
will not able to update the firmware from Settings.
• Settings is not available while the firmware is updating. Don't try to access Settings from another computer
until the update is complete.
Updating Manually
1
In Settings, click Management.
2
Click
to the right of "Update".
3
Click Install Update.
You can also download the latest firmware from the Buffalo website.
126